松下4點單元繼電器AY33001,RT3S-12V
Part No. |
Rated input voltage |
Input current |
Allowable variation of rated input voltage |
RT3S-12V |
12 V DC |
11.5 mA (Relay 10 mA + LED 1.5 mA) |
12 V DC ± 10% |
RT3S-24V |
24 V DC |
10.5 mA (Relay 7.5 mA + LED 3 mA) |
24 V DC ± 10% |
Item |
Specifications |
Condition |
|
Breakdown voltage |
Between input and output |
2,000 Vrms |
for 1 min. |
Between different terminals (between relays, both ways) |
1,500 Vrms |
for 1 min. |
|
Insulation resistance |
Min. 100 MΩ (Measurement at same location as “Breakdown voltage” section.) |
Using 500 V DC megger |
|
Vibration resistance (destructive) |
10 to 55 Hz at double amplitude |
In vertical, horizontal and longitudinal directions |
|
Vibration resistance (functional) |
10 to 55 Hz at double amplitude |
|
|
Shock resistance (destructive) |
Min. 196 m/s2 |
In vertical, horizontal and longitudinal directions |
|
Shock resistance (functional) |
Min. 98 m/s2 |
In vertical, horizontal and longitudinal directions |
|
Ambient temperature |
-20°C to +55°C - 4°F to +131°F |
Not freezing and condensing |
|
Ambient humidity |
35% to 85% R.H. |
Not condensing |
|
Storage temperature |
-30°C to +80°C -22°F to +176°F |
Not freezing and condensing |
|
Terminal screw fasten torque |
0.3 to 0.5 Nm |
|
|
Coil surge absorber |
Diode (1 A, 400 V) |
|
|
Cross connection protecting diode |
1 A, inverse voltage 400 V |
|
|
Unit weight |
Approx. 100 g 3.53 oz |
|
*1 |
The value of breakdown voltage and insulation resistance is the initial one. |
*2 |
Condensing occurs when the unit relay is exposed to sudden temperature change in a high temperature and high humidity atmosphere. This may cause some troubles like insulation failure of the socket or the print circuit board. Take care under this condition. |
*3 |
Below 0°C 32°F, condensing water can freeze and cause socket contact failures and other problems. Take care under this condition. |